Trust is good. Measuring is better!
Designation: Sample Draw with PID, IR, O2, CO, H2S, VOC and Super Toxic Sensor Options

 

Features

  • 6 Operating modes
  • Smallest 6 gas sample draw
  • 2 Interchangeable smart sensor slots
  • 4 PID options: 10.6 (2 ranges) eV, 10.0 eV, and 11.7 eV lamps
  • PID library of over 600 VOCs — Easily switch target VOC from customizable user list or a recently used list
  • Benzene specific version
  • PPM Leak Check mode
  • LEL sensor protection mode
  • Man-down alarm
  • Panic alarm • Auto display rotation
  • Peak-bar display
  • LED Light source
  • Internal sample pump
  • Light weight, small, rugged IP-67 design
  • Interchangeable battery packs (Li-ion / alkaline)
  • Operates up to 14 hours on Li-ion battery pack, fully recharges in 3 hours; 8 hours operation with alkaline pack
  • Field replaceable sensors, batteries, filters and pump
  • Intrinsically safe ATEX / IECEx / cCSAus

Description

Simply put, the GX-6000 is a game changer. This powerful hand-held PID gas monitor is capable of simultaneously monitoring up to 6 gases.

Applications

  • Confined space entry
  • Hazmat response teams
  • Arson investigation
  • Remediation sites
  • Perimeter monitoring
  • Leak detection
  • Landfill monitoring
  • Wing tank entry

6 Gas Monitor,

  • PID gas monitor with simultaneous detection and display.
  • Dual VOC display with 2 PID sensors installed.
  • Monitor the standard 4 confined space gases which include combustibles, O2, CO, & H2S as well as carbon tetrachloride, acrylonitrile, chloroform, methanol, refrigerants
    (R-143, R-132A), and more.
  • GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors.

Safety Features

The GX-6000 is equipped with a strong internal sample pump in addition to advanced safety features.

  • Man-down alarm
  • Panic alarm
  • LED flashlight
  • Large auto rotating LCD display

PID Gas Monitor

Long life 11.7 eV lamp now available, Typical 9 to 12 month life.

The GX-6000 is the only multi-gas instrument with an 11.7 PID sensor option. Traditional solutions include a single gas monitor with an 11.7 PID sensor. If there are other requirements like confined space safety, a second instrument would be required. The GX-6000 provides the flexibility to configure one instrument for multiple applications. This reduces the need to purchase separate instruments for specific applications.

The GX-6000 has 2 additional smart channels that accept PID, IR or super toxic sensors. Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC’s as well as a list of 8 of the most recently used VOC’s. A benzene-specific version is available using a pre-filter tube for detecting low levels of benzene. Four PID sensors are available, 10.0 eV, 10.6 eV (low or high range), and 11.7 eV. Any combination of two PID sensors can be installed.

  • 0 – 1000 ppm PID with 11.7 eV lamp smart sensor
  • 30 of the commonly used VOC’s.
  • 8 of the most recently used VOC’s.

Reliable and Durable

The GX-6000 is a rugged personal PID gas monitor built for the nastiest environments. Most noteworthy, it is equipped with a removable impact-resistant rubber boot.

  • Dust and water resistant enclosure with an IP-67 rating.
  • 5 bright LED lights on 3 sides of the instrument.
  • View Alarms easily from a variety of perspectives.
  • Vibration and loud audible alarm for immediate notification.

Equipped with a strong internal sample pump, a man-down alarm, a panic alarm, an LED flashlight, and large auto rotating LCD display, the GX-6000 can operate as a single gas PID unit or a multifunctional tool utilizing all 6 channels. The GX-6000 with a PID sensor will come equipped with a library of over 600 VOC gases to choose from as standard. Choosing from the library is easy with a personalized favorites list of 30 commonly used VOC’s as well as a list of 8 of the most recently used VOC’s. A benzene-specific version is available using a pre-filter tube for detecting low levels of benzene.

 

Gases & Detectable Ranges

Gas

Measuring Range

Reading

 

Increment

Alarm

 

Set Points

Accuracy

 

(which ever
is greater)

PID Sensors

10.6 Lamp

   

600 VOC’s

   

0 – 50,000 ppb

 

0 – 6,000 ppm

 

1 ppb: (< 5000 ppb)

 

10 ppb: (> 5,000 ppb)

0.1 ppm: (< 600 ppm) 1 ppm: (> 600 ppm) 

A1: 5,000 ppb

A2: 10,000 ppb

A1: 400 ppm

A2: 1,000 ppm

 

 

 

 

 

± 10% of reading,

 

± 1 digit

10.0 Lamp

 

Benzene Specific

300 VOC’s

0.1 – 50 ppm

0 – 100 ppm

0.01 ppm (0 ~ 10 ppm)
0.1 ppm (10 ~ 50 ppm)

0.01 ppm (0 ~ 10 ppm) 0.1 ppm (10 ~ 100 ppm)

No Alarms

A1: 5 ppm

 

A2: 10 ppm

11.7 Lamp

High Voltage Lamp

0 – 1000 ppm

0.1 ppm

A1: 400 ppmA2: 1,000 ppm

Galvanic

Oxygen (O2)

0 – 40.0% Vol.

0.1% Vol.

A1: 19.5 Vol.A2: 23.5 Vol.

± 0.5% O2

Electro Chemical

Carbon Monoxide (CO)

0 – 500 ppm1 ppm

A1: 25 ppm

A2: 50 ppm

TWA 25 ppm

STEL 200 ppm

 

± 5% of
reading or
± 5 ppm

Hydrogen Sulfide (H2S)

0 – 100.0 ppm0.5 ppm

A1: 5.0 ppm

A2: 30.0 ppm

TWA 1.0 ppm

STEL 5.0 ppm

 

± 5% of
reading or
± 2 ppm

       
Toxics (EC Sensors)

Ammonia (NH3)

0 – 400.0 ppm

0.5 ppm

A1: 25 ppm

A2: 50 ppm

 

 

 

 

 

± 10% of
reading or ± 5% of full scale

Chlorine (Cl2)

0 – 10.00 ppm

0.05 ppm

A1: 0.5 ppm

A2: 1.0 ppm

Hydrogen Cyanide (HCN)

0 – 15.0 ppm

0.1 ppm

A1: 5 ppm

A2: 10 ppm

Nitrogen Dioxide (NO2)

0 – 20.00 ppm

0.05 ppm

A1: 3 ppm

A2: 6 ppm

Sulfur Dioxide (SO2)

0 – 99.90 ppm

 

A1: 2 ppm

A2: 5 ppm

IR Sensors

Carbon Dioxide (CO2)

0 – 10,000 ppm

0 – 10.00% Vol.

 

20 ppm0.02%

A1: 5,000 ppm

TWA 5,000 ppm

A1: 0.50% Vol

A2: 3.00% Vol

STEL 3.00% VolTWA 0.50% Vol

 

 

 

 

± 5% of
reading or ± 2% of full scale

Methane (CH4) 

0 – 100% LEL

0 – 100% Vol.

1% LEL/
0.5% Vol

A1: 10% LEL

A2: 50% LEL

Hydrocarbons  0 – 100% LEL
0 – 30% Vol.
   
Catalytic

Hydrocarbons (CH4, std)

0 – 100% LEL

1% LEL

A1: 10%LEL

A2: 50%LEL

± 5% of
reading or ± 2% LEL

Common Specifications

Alarm Types Gas alarmLow and high adjustable

Man-down

1st – self reset

 

2nd – latching

Trouble

Low flow

 

Sensor connection

Low battery

Circuit error

Calibration range

Sample Method Sample draw pump, flow rate 0.45 LPM, 50 foot sample range
Display Digital LCD, autobacklight, peak bar display, auto display rotation, and customize order of gases
Audible Alarm 95 dB at 1 ft.
Languages English, Spanish, French, German, Italian, Japanese, Korean, Portuguese, Russian

Continuous
Operation

14 hours on Lithium-ion battery pack. Complete recharge in 3 hours.

 

8 hours Alkaline battery pack (3 AA size within each pack)

Operating Temp. & Humidity -4°F to 122°F (-20°C ~ +50℃), 0- 95% RH non condensing
Dimensions 2.6” W x 7.8” H x 2” D (H200 x W68 x D52 mm)
14 ounce (400g) (with lithium battery pack)
Case Material Dust and water resistant with IP-67 approval
(exclude sample hose and probe)

Safety Design /

Approvals

Explosion proof: IECEx , ATEX , TIIS , cCSAus

 

Explosion class :Ex ia IIC T4 Ga Others: CE Marking

Standard
Features

  • 2 Smart sensors slots auto recognize sensor changes
  • Library of over 600 VOC’s
  • User defined VOC list. Up to 30 frequently used
  • Recent VOC list for last 8 selected gases
  • Pump and circuit status indicators
  • User & station ID selection menu
  • Datalogging (interval, alarm trend, station and user ID)
  • Snap logging – on demand data logging
  • Demand zero / Auto zero
  • BUMP and CAL expiration alarm
  • Flashlight
  • IrDA communication
  • LEL sensor protection mode

Standard
Accessories

  • Rubber boot
  • Belt clip
  • Hand strap
  • Tapper nozzle
  • Probe with hydrophobic & dust filter 3’ teflon lined hose
  • Benzene pre-filter tubes and holder (benzene versions)

Optional
Accessories

  • SDM-6000 calibration station
  • Bundles with instrument carrying case and accessories
  • Flexible probes
  • Up to 50 foot sample hoses
  • Filter set
  • IrDA cable

Warranty

Two years material (including sensors) and
workmanship. One year for PID sensor (Two monthsfor 11.7 eV lamp)

 

« Back to overview
This email address is being protected from spambots. You need JavaScript enabled to view it.