Gas warning and measuring devices for almost all gases.

The Polytector III G999 is the world's smallest and lightest 4-7 gas detector with integrated electric suction pump and radio module. Depending on the sensor configuration, the device warns of dangers caused by toxic and flammable gases and vapours and of oxygen deficiency and excess. With individual sensor combinations and extensive accessories, the G999 meets every requirement profile.

The Polytector III can send the current measurement data by radio to the central unit GfG-Link or an operations center. In this way, a head of operations is always informed about the current risk situation of his employees.

The GfG-Link is the secure link between the devices. Depending on the version, four or ten devices can be connected wirelessly to a GfG link. The user name for quick identification of the device as well as the current measurement data are displayed on the display of the GfG link. The life-saving man-down alarm has a special status in the alarm states of the GfG link. It is amplified by an unmistakable acoustic signal sequence and a flashing red alarm display. The tableau on the front of the GfG link represents all connected devices with current status. The range in the open field is about 700m. Ideally, the safety status of employees can be monitored within a range of 1400m.

The head of operations can send short messages to the displays of the gas detectors via the integrated pager function. He has the choice between free texts on the operational PC or preconfigured standard messages via the GfG link.

The sensor slots can be variably assigned with the following number of sensors:

1x thermal tint (WT)

1x infrared (IR)

1x photoionization (PID)

1x hybrid (WT/HL) up to

4x electrochemical (EC).

The design of the G999 allows for a wide variety of sensor combinations. Thus, the gas detector can be individually adapted to your requirements.

With only one IR measuring chamber, carbon dioxide and hydrocarbons such as methane and propane can be precisely detected simultaneously in the Polytector III. The sensor uses up to four gas-specific wavelengths. Absorption gaps and wavelengths of the radiation are optimally matched to gases and measuring ranges. Optionally, the infrared sensor can be pressure compensated if larger atmospheric pressure fluctuations are to be expected in the application (e.g. in mining). Damage to the sensor by sensor poisons, e.g. silicone compounds or hydrogen sulfide, can be excluded with IR technology. The IR sensor has the advantage over heat tint sensors that it is not damaged even at high gas concentrations.

In many applications, a simple detection of flammable gases in the range 0-100% LEL is not sufficient. At the same time, the gas detectors must be more powerful and cover more extensive measuring ranges. The Polytector III can be equipped with the high-end GfG hybrid sensor. This sensor can measure flammable gases from 0-10,000ppm, from 0-100% LEL and from 0-100Vol.%. By switching in the device menu, your gas detector can be turned into a powerful leak detector in conjunction with the smart, electric suction pump.

The clear graphic display can be rotated by 180° and can be easily read in any wearing position, e.g. if you have attached it to your clothing. Advantage: You have your hands free and all values in view. The zoom function of the display makes it easier to read, e.g. under a breathing mask or without reading glasses.

Three alarm limit values for oxygen and flammable gases as well as two instantaneous limit values for toxic gases and two exposure alarms ensure comprehensive protection of the equipment carrier. In addition, the long-term value (LZW) and the short-term value (KZW) are automatically monitored as an average value and the average values are stored. All limit values are individually adjustable under code protection.

The Microtector III G999 combines technical innovation with impressive design. Independent expert committees confirm the outstanding performance in design and functionality, with particular emphasis on the small size and the extraordinarily low weight. No other gas measuring and warning device with integrated suction pump has won as many awards as the Polytector III from GfG.