Trust is good. Measuring is better!
Designation: digital process gauge | data logger

Characteristics

  • Multi-channel process display with data logger
  • up to 8 inputs 0/4...20 mA
  • up to 8 inputs Pt100/Pt500/Pt1000
  • graphics-capable backlit LCD display
  • 2 switching outputs
  • Interface RS-485/Modbus RTU
  • CE certified
  • Made in EU

Description

The MD200 data logger is designed to record measured values and display them in the graphic, backlit LC display. The device is equipped with either 1, 4 or 8 temperature or current inputs. The internal data memory of 2MB is sufficient for approx. 0.5 million data records (8MB as variant with USB host port). If a USB stick is connected, the recording time can be extended as desired without the need for data transfer to the PC. A digital signal input enables the triggering of the recording process. The device also has two freely configurable switching outputs. An individual alphanumeric description is available for each channel. The multilingual menu, supported by text descriptions, makes the configuration process very easy. The transmitter supply enables the supply of connected transmitters. The RS-485 interface allows the device to be connected to the process control system.

Optional Features

  • Input signal Pt 100 / Pt 500 / Pt 1000
  • Thermocouple Input
  • Wall enclosure 166 x 161 mm

Functionality

  • Data and configuration transfer via USB, USB stick or RS-485
  • Sampling rate selectable from 1 sec to 1 h
  • Triggering of the measured value recording via digital input
  • Parameterizable under- and exceedance messages
  • Contrast and brightness of the display adjustable
  • Software for the parameterization of the device as well as for the display and archiving of the measured values

Display:

  • graphic-capable LCD display

Input:

  • 1/4/8 analog inputs
  • 1/4/8 RTD inputs

Output:

  • 2 OC contacts
« Back to overview
This email address is being protected from spambots. You need JavaScript enabled to view it.